- Version
- 2.0.05
- Developer
- LightBurn Software
- Interface in
- English
- Licence on file
- Included
- macOS it runs on
- macOS 10.13 or later
- Chip support
- Intel 64-bit
In the edit
If you’ve used a vector drawing app like Illustrator or Inkscape, you already understand half of what LightBurn does. The other half is sending those shapes to your laser cutter and controlling exactly how it burns.
Clean workspace with drawing canvas and device control
After installing, open the app and you’ll see a clean workspace with a drawing canvas on the left and a device control panel on the right. Import a vector file (AI, SVG, DXF) or a raster image (PNG, JPG), then use the built-in editor to adjust shapes, apply boolean operations, or weld paths together.
What settings do I need to configure before my first cut?
Head to the laser tab to set power, speed, and pass count for your material. You can also adjust brightness, contrast, and dithering for raster images, and define the cut order to minimise shifting. LightBurn remembers these as presets, so you can switch between materials quickly.
Can I use LightBurn with a rotary axis or a camera?
Yes. The software supports rotary axes for engraving cylindrical objects, and you can connect a camera to align your design with the workpiece. Both features are configured in the device settings and work without extra software.
Even with a straightforward app like LightBurn, a few snags tend to trip people up, especially when they’re switching from another laser control program or setting up on a new Mac. I’ve seen these come up often enough that they’re worth flagging.
Apple Silicon Mac needs Rosetta to open the app
The app won’t open on an Apple Silicon Mac.
LightBurn 2.0.05 is built for Intel 64-bit processors, so if you’re on an M1 or M2 Mac, you need Rosetta installed. macOS usually prompts you to install Rosetta the first time you try to open an Intel app, but if it doesn’t, open Terminal and run softwareupdate --install-rosetta. Once Rosetta is in place, LightBurn launches normally and runs fine for everyday work.
My laser cutter isn’t showing up in the device list.
Check the connection type first. LightBurn talks to lasers via USB, Ethernet, or Wi-Fi, depending on your controller. If you’re using a USB connection, try a different cable or port, and make sure the laser is powered on before you open LightBurn. For Ethernet or Wi-Fi connections, verify the IP address in the device settings. If the controller uses a custom baud rate, you may need to set that manually in the laser tab.
Shapes import with the wrong scale or position.
This usually happens when the original file uses a different unit (inches vs. mm) or an unusual artboard size. Before you import, check the document settings in your vector editor and set the units to match your LightBurn workspace. You can also rescale everything after import by selecting the shape and adjusting the dimensions in the transform panel.
The cut order isn’t what I expected.
LightBurn lets you reorder cuts manually by dragging lines in the cut order list. If you’re cutting multiple pieces from one sheet, you can group related shapes so the laser finishes one piece before moving to the next. This reduces travel time and keeps the workpiece from shifting.
My raster engraving looks muddy or too light.
Open the image settings tab and adjust brightness and contrast first. If the image is still flat, try a different dithering mode. LightBurn’s dithering options convert your image into a pattern of dots that the laser can engrave, and some modes work better for photographs than for line art. Experiment with a small test square before you commit to the full piece.
Built-in vector editor for drawing without separate software
Do I need a separate drawing app to prepare my files?
Not necessarily. LightBurn includes a built-in vector editor with shape creation, boolean operations, offset, and weld tools. You can draw simple designs from scratch or import a vector file and tweak it directly. If you’re coming from a professional vector workflow, you can still use Illustrator or Inkscape for complex artwork and then bring it into LightBurn for the laser settings.
Will LightBurn work with my cheap desktop laser?
It supports most GCode, DSP, and Galvo controllers, which covers a wide range of hobbyist and semi-professional machines. If your laser uses a proprietary controller, check the LightBurn forums or the device compatibility list on the developer’s site. Many off-brand lasers use standard controller boards and work without trouble.
Can I switch between LightBurn and other software without losing my settings?
Yes. LightBurn saves its configuration in files you can back up or move to another machine. The material library, device profiles, and workspace layouts are all stored separately, so you can keep one setup for a CO2 laser and another for a diode laser, and swap between them as needed.
Does LightBurn support batch processing or automated jobs?
It doesn’t have a dedicated batch mode, but you can queue jobs manually by sending them to the device one after another. If you’re running production work, you can save your settings as presets and reuse them without re-entering power and speed values each time.
A workflow for engraving a photograph onto wood
This is a task I do often: taking a digital photo and turning it into a clean engraving on a wooden plaque or coaster. Here’s how I run it from start to finish.
1. Prepare the image.
I open the photo in a basic image editor and crop it to the size I want. I also convert it to greyscale, because LightBurn’s dithering works best with a single brightness channel. Save the result as a PNG or JPG.
2. Import into LightBurn.
I drag the image onto the canvas. The import dialog lets me set the target dimensions and position. I place it where I want on the virtual workspace, which matches the physical bed of my laser.
3. Adjust image settings.
With the image selected, I open the image settings tab. I bump up the contrast to make the dark areas distinct, then adjust brightness so the highlights don’t wash out. I pick a dithering mode — usually Floyd-Steinberg for photographs — and preview the result on screen.
4. Configure the laser.
In the laser tab, I select the material preset for wood. If I’m engraving a new batch, I run a small test square to dial in power and speed.
5. Send the job.
I hit the send button and watch the first pass. If the engraving looks too light, I increase the pass count by one and run it again. LightBurn remembers the last settings, so I don’t have to re-enter everything.
6. Clean up.
After the job finishes, I remove the workpiece and wipe off any residue. The software logs the job in the history panel, so I can reuse the same settings later with a different photo.
Saturday morning project session with last session's grid lines
Let’s say it’s a Saturday morning and I have a few small projects to run. I open LightBurn, and the first thing I see is the canvas from last session, still showing the grid lines for my laser bed. I clear it and start fresh.
I’ve got three items to cut: a set of keychain shapes from acrylic, a small wooden sign with text, and a leather bookmark with a decorative border. I import the keychain SVG file first. The shapes come in at the right size, but one of the paths has a stray node. I switch to the Edit Nodes toolbar, select the node, and delete it. Then I weld the overlapping parts together so the laser cuts a single continuous outline.
Next, I create the wooden sign. I use the text tool to type the name, then I adjust the font size and spacing. The sign needs a rounded rectangle border, so I draw one with the shape tool and centre it behind the text. I select both elements and use the align tool to centre everything. For the cut, I set the rectangle to a higher power and the text to a lower power for engraving. LightBurn’s layer system lets me assign different settings to each shape, so the laser cuts the border first and engraves the text in a separate pass.
The leather bookmark is simpler: a rectangle with a hole for the tassel. I draw the rectangle, then a small circle near the bottom. I select both and use the boolean subtract tool to punch out the hole. I set the power lower for leather, because it burns faster than wood, and I reduce the speed so the edges stay clean.
I send the jobs one by one, watching the first few seconds of each cut to make sure the laser starts on the right spot. Between jobs, I check the material library to see if I want to save the leather settings as a new preset. I do, so next time I won’t have to guess the numbers.
By the time I’m done, I’ve cut three different materials without leaving LightBurn once. The workspace is still open, the device is idle, and the history panel shows the last three jobs. I close the app, and it remembers the layout for next time.
New this release
- Fixes window title bar placement when stored offsets are incorrect.
- Fixes rotary jogging direction in CCW mode.
- Fixes a crash when importing SVG files with ungrouped DEF shapes.
Mac it needs
- macOS 10.13 or later
- Intel 64-bit processor (Rosetta required on Apple Silicon)
- Interface language: English
Questions I actually get
What file formats can LightBurn import?
LightBurn imports vector formats like AI, SVG, and DXF, as well as raster formats like PNG and JPG.
Installing on a Mac
- Open the downloaded disk image (DMG) file.
- Drag the LightBurn app into the Applications folder.
- Launch the app from Launchpad after the copy finishes.
- Tip: if you're on an Apple Silicon Mac, Rosetta is required for this version.
Notes from photographers
Sign in or create your account to leave a comment.
No notes from photographers yet. If you have used this on a real folder, say which camera and which Mac.
